My EOTWAWKI belt has a Cobra Buckle and a full-length internal belt. It did not come this way. The original belt had half-length straps with plastic buckles that were attached to either end of the external belt (very much similar to the first picture). This was a significant weak point in the belt’s construction.
I cut the two half-length belts off. I then had a canal through which I ran the full-length belt and emplaced a full-length belt with Cobra buckles. In order to prevent the two belts from slipping forward or backward I took a needle, a Gerber tool and dental floss and I PAINSTAKINGLY sewed (attached) the external belt to the internal belt. I did this along the entirety of the mating surface of the external and internal belt system.
The attached pictures will assist in visualizing what I’ve described.
A detailed layout of the addition of the full-length belt with cobra buckle is included in the accompanying photographs.
If you have questions about this particular belt setup and equipment selection, or if you would like some assistance setting up your own belt, send an email to: [email protected].
Survive, Fight, Win. Return With Honor.
——–
Krieger is a veteran of the United States Army Special Forces Command. He spent 22 1/2 years in the service of our country and continues to deploy as an Unconventional Asset Recovery Agent. Krieger is one of the primary instructors for many of the Hybrid Tactics courses, and provides private classes. To sign up for a personalized course with Krieger or any of our Hybrid Tactics instructor, contact us by sending an email to [email protected] or click the following link: https://hybridtacticssecurity.org/…/the-private-basic.
